Type / Brand - Siemens
Siemens
Type / Brand - Siemens
 
Description of sitrans fcs400 flow sensor

The flow measuring principle is based on the Coriolis Effect. The SITRANS FC430 flowmeter consists of a sensor type FCS400 and a transmitter FCT030.

The FCS400 sensor’s measuring tubes are energized by an electro-mechanical driver circuit which oscillates them at their resonance frequency. Two pick-ups are placed symmetrically upstream and down- stream of the central driver. When a process fluid passes through the sensor, the Coriolis Effect will act on the vibrating tubes and cause deflection which can be measured as a phase shift between pick-ups 1 and 2. The phase shift is proportional to the mass flow rate.

The amplitude of the driver is automatically regulated to ensure a stable output from both of the pickups. The temperatures of the sensor tubes and frame are measured with high precision to provide compensation for changes with temperature in the measuring properties. The sensor signals are analyzed for flow, density and fluid tem- perature in the sensor front end. The digital signal is controlled to conform to high Safety Integrated Level (SIL) and sent digitally to the transmitter via standard cable. The transmitter further cal- culates total mass and volume, fraction, dosing control and many other functions.

 The front-end module has a process noise filter, which can be used to improve the meter’s performance when installation and application conditions are not ideal. Typical interferences from process conditions such as pump pulsations, mechanical vibra- tions, oscillating valves can be reduced considerably. 
 
Siemens MAG 3100 and MAG 3100 HT Flow sensor

The SITRANS F M MAG 3100 is an electromagnetic flow sensor in a large variety that meets the demands of almost every flow application.

Siemens MASS 2100 DI 1.5 Flow sensor

MASS 2100 DI 1.5 is suitable for low flow measurement applications of a variety of liquids and gases. The sensor offers superior performance in terms of flow accuracy, turn-down ra...

Siemens SITRANS FCS200 Flow sensor

SITRANS FCS200 (DN10, DN 15 and DN 25) is a Coriolis sensor specialized for accurate mass flow measurement of gases. The sensor offers superior performance in terms of flow accur...

Siemens SITRANS F C MC2

SITRANS F C MC2 is available as standard version (DN 100 to DN 150 (4" to 6")) The MC2 sensor is suitable for accurate mass flow measurement of a variety of liquids. ...