Type / Brand - Wika
Wika
Type / Brand - Wika
 
Description of temperature transmitter

The model T24 temperature transmitter has been specifically designed for the application of a Pt100 with 2- or 3-wire connection or 4 ... 20 mA analogue output (loop-powered 2-wire design).
The model T24 temperature transmitter combines the known quick response of an analogue transmitter with the flexibility of configuration by means of PC. The quick stabilisation of the output current after excitation of the power supply enables the use of this transmitter in multiplex systems. Setting of the measuring range, type of sensor and sensor burnout behaviour takes only a matter of seconds thanks to the easy-to-use configuration software. Time-consuming adjustment and sensor simulation are not required for this transmitter.
The model T24 temperature transmitter can be remotely configured from the control room via the current loop. Possible measuring errors which might, for example, result from poor thermometer position, can be compensated by means of the function 'Adaption'.
 
ABUSTEK ATSIso Block

The ATxIsoBlock is a 2-wire in-head temperature transmitter with galvanic isolation between input and output, microprocessor based designed for the flexibility of accepting mV, Pt1...

ABUSTEK Atx Rail (0-10V)

The ATxRail 0~10 V is a 2-wire DIN rail mount temperature transmitter, microprocessor based designed for the flexibility of accepting mV, Pt100 and a variety of thermocouples as th...

ABUSTEK Atx - Block

The ATxBlock is a 2-wire in-head temperature transmitter, microprocessor based designed for the flexibility of accepting mV, Pt100 and a variety of thermocouples as the input senso...

ABUSTEK Ats Config USB

TheATxConfig USB is the configuration interface to configure the whole ABUS Smart Transmitters family with 0 to 10Vdc and 4 to 20mA outputs. By using this interface the user can ...