Type / Brand - GAMA Control Inc.
GAMA Control Inc.
Type / Brand - GAMA Control Inc.
 
Description of test pump, pneumatic

Areas of application Test pumps are used in generating pressure for the testing, adjusting and calibrating of mechanical and electronic pressure measuring instruments by means of comparative measurements. These pressure tests can be carried out in laboratories, workshops or on site at the set measuring point. Ease of operation When the device under test and a suitably accurate reference measuring instrument are connected to the test pump, after actuating the pump, the same pressure will act on both measuring instruments. Calibration or adjustment of the device under test can be carried out by comparing the two measured values at any pressure value. In order to enable the accurate generation of the measuring points, the test pump is fitted with a fine adjustment valve.
 
See Believe Differential Input Process Indicator

CPI 300D instruments are Dual Channel Differential Reading instruments. CPI 300D measure and display process parameters like level, Pressure, Temperature, Flow, Vibration, Humidi...

Millennium Instrument Limited MANIFOLD AMV-2R4

1x isolation and 1x vent valve for instrument balancing applications. All valves have 2-piece non-rotating hardened (17-4PH) tips as standard for bubble tight shut off & long s...

Wika Precision Loop Calibrator

The Precision Loop Calibrator CEP1000 provides significantly extended performance when compared to any competitive calibrator. With an accuracy of 0.015 % of reading, with 0.001 mA...

Wika Hand-held temperature calibrator

The model CEP3000 hand-held temperature calibrator is an ideal instrument to handle all your temperature calibration tasks in a rugged, inexpensive package. It combines virtually a...